/ 4 min read

7 Steps to Reduce the Overheating of Mechanical Purge Compounds

7 Steps to Reduce the Overheating of Mechanical Purge Compounds

overheating purgeI’ve worked with numerous injection molding and extrusion plants over the course of my career since early 2000’s as a Technical Sales Representative. A question that comes up every now and then over the years from these processing plants is, “how should we reduce the overheating of a mechanical purge compound”?

Generally, this question pops up when the purge compound is used near or over the upper limit of its recommended operating temperature window and becomes over-sheared. I’ve fielded this question often enough to be able to propose some effortless fixes to try to alleviate this issue that your plant may or may not be aware of.

To reduce the overheating of a mechanical purge compound due to over-shearing, I’ve been suggesting 7 simple steps:

  • 1.) Use the proper purge compound for the production resins
  • 2.) Generally, it’s always best to purge at the normal operating temperature window of polymer
  • 3.) Come off the back pressure slightly, while still using enough of it to keep the screw forward as much as possible
  • 4.) Lower the screw RPM’s slightly, while still trying to maintain the high RPM’s
  • 5.) Make sure your plant has proper ventilation at the machines since ANY resin in the market can emit gases when exposed to heat or too much of it
  • 6.) Use Personal Protective Equipment such as a respirator
  • 7)Empty the purge extrudate into a bucket of water

It should be noted that the overheating of any thermoplastic is possible. It’s not exclusive to just purge compounds.

These are straightforward and conventional suggestions that are generally painless and stress-free for the technicians. I recommend checking with your purge supplier to see if these small variations will work with their products while still generating a high level of purging performance. 

Ready to reduce your production downtime to protect your profits? Learn more about how purging compounds and process efficiency work in tandem.

Related Posts

Comments

Get Started

Ready to start improving your efficiency and increasing your profitability?

Free Sample

Request a free sample of Asaclean® Purging Compounds for your plant and start saving today.

Request your free sample

Cost Savings Calculator

Use our free calculator to see how much you could be saving with Asaclean® Purging Compounds.

See your savings